Water Damage Restoration

Wonder what exactly water damage restoration is? As you know, when your home is suffering from water damage, you’ve got a big mess – and a big job – on your hands. The procedure of repairing your home to its pre-loss condition following a flood, overflow, or other water damage and mold event is known as water damage and mold restoration. During the water damage restoration process, several key procedures take place: loss assessment, categorizing water using the water source’s contamination amounts, drying and decontaminating the construction and its contents, monitoring the process, and completion.

Before any restoration task is undertaken, it really is first evaluated so that an appropriate response is taken. For example, if you were considering buying and restoring a classic car, you’d need to know exactly what you are coping with and where to begin. When it comes to water damage, not merely must the technicians fully understand the task before them, insurance companies are often involved. Not only must a water damage restoration technician understand what is damaged and what needs to be done, the damage must be extensively inspected and documented and exact estimates made. The foundation of the damage must also be identified in order that necessary repairs could be made.

Within the assessment, water is categorized based on the contamination levels (Category 1, 2, or 3) of its normal water source. For example, water damage from a clean source such as for example an overflowing sink is easier to deal with than a water source containing natural sewage. The categories are as follows:

o Category 1 – Drinking water from clean sources such as for example sinks, pipes, and toilet bowls (without urine or feces)

o Category 2 – Water with some contaminants such as water from a washer, dishwasher, or toilet with urine (but no feces)

o Category 3 – Water that is extremely unsanitary, with the capacity of causing severe illness or demise if the water was ingested. Types of Category 3 water include sewage, water from a toilet bowl made up of feces, floodwaters from rivers, and standing normal water with microbial growth.

Keep in mind that the source water may have originally been fairly clean up and sanitary, nonetheless it can quickly come into contact with unsanitary contaminants and be Category 2 or 3 3 water.

Water damage usually affects not just the immediate area but additionally the home’s contents. Water damage restoration technicians must also deal with furniture, drapes, carpets, electronics, textbooks, and other contents affected by the water. A few of these contents will be moved prior to the water gets to them in an attempt to prevent damage, others should end up being dried, cleaned, and decontaminated, among others still will be damaged to the point where they need to be discarded.

Finally, the drying, clean-up, and decontaminating process begins. During this time period, equipment such as blowers, scrubbers, subfloor drying products, and dehumidifiers are put into place and left for many days with the drying process monitored to make sure that the all equipment is placed appropriately and working since it should. Humidity levels, temps, and moisture content of infected areas are monitored with more drying continuing as needed. Along with drying, cleaning, decontaminating, mold inhibitors enable you to prevent mold from increasing. Deodorizers may also be required. Even if the water damage and mold was from a Category 1 water resource, contaminants in carpets and rugs and the underlying carpeting pad can quickly result in a foul odor.

Author: Jackie Ross